
● up to 8GB 64Bit DDR4 RAM at 1600MTps, soldered, ECC optional |
● hybrid 32-bit mode to support legacy software |
● temperature sensor |
● All on board supply voltages are monitored by a separate µ-controller. |
Dimensions | b:86mm, l:156mm, h:30mm |
CPU | NXP QorIQ T1042 |
Architecture | PowerPC |
Cores | 4x e5500 64Bit @ up to 1.5GHz core frequency |
System Memory | up to 8GB 64Bit DDR4 RAM at 1600MTps, soldered, ECC optional |
Flash | up to 4GB SLC NAND Flash (soldered) |
SPI-Flash | up to 16MB SPI Flash |
EEPROM | 16kB |
Ethernet | four 10/100/1000Mbps Ethernet ports , IEEE Std. 1588 support |
USB 2.0 | 2x USB2.0 Host/Client OTG support, 1x USB to UART (debugging) |
Graphics Controller | 12 Bit Display Interface |
LCD Interface | 1x DVI-I |
other I/O Interfaces | 1x UART (TTL) 1x JTAG (with COP support) 2 x miniPCIe (x1) optional: 1 PCIe via edge card connector & 1 PCIe via extension connector |
SATA | 1x SATA |
Flash CARD | 1x microSD Card slot |
Power Supply Voltage | Single +7 - +24 V power input |
Battery | 1x CR2032 battery (for RTC) |
Software Support | Linux Microware OS-9 others on request |
No. | Title | Description | Status |
---|---|---|---|
854301 | miriac™ SBC-T1042 | miriac SBC-T1042 Single Board Computer, T1042@1.2GHz SoM, 2GB DDR4 RAM, 512 MB Flash Speicher | available |
854310 | miriac® SBC-T1042 Starter Kit | miriac SBC-T1042 Development Kit, includes order #854301, Linux BSP, accessories | available |